Execute

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:PRERrors:COPY:EXECute

Commands in total: 1

Subgroups: 0

Direct child commands: 1

set ( satelliteSvid=SatelliteSvid.Default ) → None

set_with_opc ( satelliteSvid=SatelliteSvid.Default, opc_timeout_ms: int = -1 ) → None

# [SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:PRERrors:COPY:EXECute
# set:
driver.source.bb.gnss.svid.navic.prErrors.copy.execute.set(satelliteSvid = repcap.SatelliteSvid.Default)
# set_with_opc:
driver.source.bb.gnss.svid.navic.prErrors.copy.execute.set_with_opc(satelliteSvid = repcap.SatelliteSvid.Default, opc_timeout_ms = 3000)

Applies the configuration of the current satellite (SVID<ch>:<GNSS system>) to the satellite defined with the method RsSmw.source.bb.gnss.svid.gps.prErrors.copy.svid.set() . Both SV IDs belong to the same GNSS system.

set_with_opc() does the same as set(), but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout to set the timeout value.

Parameters:

• satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

• opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.