Power

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:POWer
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → float[source]
# [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:POWer
value: float = driver.source.bb.gnss.svid.gps.mpath.v.a.echo.power.get(satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the additional power offset for the selected echoes.

Parameters:

  • satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

  • echo – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)

Returns:

power_offset: float Range: -15 to 0, Unit: dB

set(power_offset: float, satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → None[source]
# [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:POWer
driver.source.bb.gnss.svid.gps.mpath.v.a.echo.power.set(power_offset = 1.0, satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the additional power offset for the selected echoes.

Parameters:

  • power_offset – float Range: -15 to 0, Unit: dB

  • satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

  • echo – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)