Cphase

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:GALileo:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:CPHase
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → float[source]
# [SOURce<HW>]:BB:GNSS:SVID<CH>:GALileo:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:CPHase
value: float = driver.source.bb.gnss.svid.galileo.mpath.v.a.echo.cphase.get(satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the carrier phase at the simulation start.

Parameters:

  • satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

  • echo – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)

Returns:

carrier_phase: float Range: 0 to 6.28, Unit: rad

set(carrier_phase: float, satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → None[source]
# [SOURce<HW>]:BB:GNSS:SVID<CH>:GALileo:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:CPHase
driver.source.bb.gnss.svid.galileo.mpath.v.a.echo.cphase.set(carrier_phase = 1.0, satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets the carrier phase at the simulation start.

Parameters:

  • carrier_phase – float Range: 0 to 6.28, Unit: rad

  • satelliteSvid – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

  • echo – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)