Dz

SCPI Command :

[SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DZ

class DzCls

Dz commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseSt=BaseSt.Default, antenna=Antenna.Default) → float

# SCPI: [SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DZ
value: float = driver.source.bb.gnss.rtk.base.a.dz.get(baseSt = repcap.BaseSt.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of an RTK base station as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

param baseSt

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Base’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

return

delta_z: float Range: -200 to 200

set(delta_z: float, baseSt=BaseSt.Default, antenna=Antenna.Default) → None

# SCPI: [SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DZ
driver.source.bb.gnss.rtk.base.a.dz.set(delta_z = 1.0, baseSt = repcap.BaseSt.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of an RTK base station as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

param delta_z

float Range: -200 to 200

param baseSt

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Base’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)