Dx

SCPI Command :

[SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DX
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseSt=BaseSt.Default, antenna=Antenna.Default) → float[source]
# [SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DX
value: float = driver.source.bb.gnss.rtk.base.a.dx.get(baseSt = repcap.BaseSt.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of an RTK base station as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

Parameters:

  • baseSt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Base’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

set(delta_x: float, baseSt=BaseSt.Default, antenna=Antenna.Default) → None[source]
# [SOURce<HW>]:BB:GNSS:RTK:BASE<ST>:A<CH>:DX
driver.source.bb.gnss.rtk.base.a.dx.set(delta_x = 1.0, baseSt = repcap.BaseSt.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of an RTK base station as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

Parameters:

  • delta_x – float Range: -200 to 200

  • baseSt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Base’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)