Area<ObscuredArea>

SCPI Command :

[SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:DELete

Commands in total: 6

Subgroups: 5

Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1 .. Nr16

driver.source.bb.gnss.receiver.v.environment.full.area.repcap_obscuredArea_set(repcap.ObscuredArea.Nr1)

delete(vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default) → None

# [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:DELete
driver.source.bb.gnss.receiver.v.environment.full.area.delete(vehicle = repcap.Vehicle.Default, obscuredArea = repcap.ObscuredArea.Default)

Appends, insertes or deletes an obscured zone.

Parameters:

• vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

• obscuredArea – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)

delete_with_opc(vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default, opc_timeout_ms: int = -1) → None

Cloning the Group

# Create a copy of the original group, that exists independently
area_copy = driver.source.bb.gnss.receiver.v.environment.full.area.clone()

Subgroups

• Append
• Count
• Insert
• Length
• Reference