Dz

SCPI Command :

[SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:A<CH>:DZ
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(vehicle=Vehicle.Default, antenna=Antenna.Default) → float[source]
# [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:A<CH>:DZ
value: float = driver.source.bb.gnss.receiver.v.a.dz.get(vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of the GNSS receiver as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

Parameters:

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

Returns:

delta_z: float Range: -200 to 200

set(delta_z: float, vehicle=Vehicle.Default, antenna=Antenna.Default) → None[source]
# [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:A<CH>:DZ
driver.source.bb.gnss.receiver.v.a.dz.set(delta_z = 1.0, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default)

Sets the antenna position of the GNSS receiver as an offset on the x, y and z axis. The offset is relative to center of gravity (COG) .

Parameters:

  • delta_z – float Range: -200 to 200

  • vehicle – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

  • antenna – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)