L2Cdma<IndexNull>

SCPI Command :

[SOURce<HW>]:BB:GNSS:MONitor<CH>:DISPlay:POWer:SYSTem:GLONass:SIGNal:L2Band:L2CDma<US0>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr0 .. Nr63

driver.source.bb.gnss.monitor.display.power.system.glonass.signal.l2Band.l2Cdma.repcap_indexNull_set(repcap.IndexNull.Nr0)
get(monitorPane=MonitorPane.Default, indexNull=IndexNull.Default) → bool[source]
# [SOURce<HW>]:BB:GNSS:MONitor<CH>:DISPlay:POWer:SYSTem:GLONass:SIGNal:L2Band:L2CDma<US0>
value: bool = driver.source.bb.gnss.monitor.display.power.system.glonass.signal.l2Band.l2Cdma.get(monitorPane = repcap.MonitorPane.Default, indexNull = repcap.IndexNull.Default)

Defines the signals to be visualized on the ‘Power View’ graph.

Parameters:

  • monitorPane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Monitor’)

  • indexNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘L2Cdma’)

Returns:

signal_state: 1 | ON | 0| OFF

set(signal_state: bool, monitorPane=MonitorPane.Default, indexNull=IndexNull.Default) → None[source]
# [SOURce<HW>]:BB:GNSS:MONitor<CH>:DISPlay:POWer:SYSTem:GLONass:SIGNal:L2Band:L2CDma<US0>
driver.source.bb.gnss.monitor.display.power.system.glonass.signal.l2Band.l2Cdma.set(signal_state = False, monitorPane = repcap.MonitorPane.Default, indexNull = repcap.IndexNull.Default)

Defines the signals to be visualized on the ‘Power View’ graph.

Parameters:

  • signal_state – 1 | ON | 0| OFF

  • monitorPane – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Monitor’)

  • indexNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘L2Cdma’)

Cloning the Group

# Create a copy of the original group, that exists independently
l2Cdma_copy = driver.source.bb.gnss.monitor.display.power.system.glonass.signal.l2Band.l2Cdma.clone()