Csv

SCPI Commands :

[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:AOFFset
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GDOP
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GSPeed
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:HDOP
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:PDOP
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:SVS
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:TDOP
[SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:VDOP

Commands in total: 22
Subgroups: 6
Direct child commands: 8

get_aoffset() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:AOFFset
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_aoffset()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_gdop() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GDOP
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_gdop()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_gspeed() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GSPeed
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_gspeed()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_hdop() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:HDOP
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_hdop()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_pdop() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:PDOP
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_pdop()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_svs() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:SVS
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_svs()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_tdop() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:TDOP
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_tdop()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

get_vdop() → bool[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:VDOP
value: bool = driver.source.bb.gnss.logging.category.umotion.csv.get_vdop()

Enables the parameter for logging.

Returns:: state: 1 | ON | 0| OFF

set_aoffset(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:AOFFset
driver.source.bb.gnss.logging.category.umotion.csv.set_aoffset(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_gdop(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GDOP
driver.source.bb.gnss.logging.category.umotion.csv.set_gdop(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_gspeed(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:GSPeed
driver.source.bb.gnss.logging.category.umotion.csv.set_gspeed(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_hdop(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:HDOP
driver.source.bb.gnss.logging.category.umotion.csv.set_hdop(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_pdop(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:PDOP
driver.source.bb.gnss.logging.category.umotion.csv.set_pdop(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_svs(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:SVS
driver.source.bb.gnss.logging.category.umotion.csv.set_svs(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_tdop(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:TDOP
driver.source.bb.gnss.logging.category.umotion.csv.set_tdop(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

set_vdop(state: bool) → None[source]

# [SOURce<HW>]:BB:GNSS:LOGGing:CATegory:UMOTion:[CSV]:VDOP
driver.source.bb.gnss.logging.category.umotion.csv.set_vdop(state = False)

Enables the parameter for logging.

Parameters:: state – 1 | ON | 0| OFF

Cloning the Group

# Create a copy of the original group, that exists independently
csv_copy = driver.source.bb.gnss.logging.category.umotion.csv.clone()

Subgroups