Height

SCPI Command :

[SOURce<HW>]:BB:GBAS:VDB<CH>:MCONfig:LFLocation:HEIGht

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get ( vdbTransmitter=VdbTransmitter.Default ) → float

set ( lf_height: float, vdbTransmitter=VdbTransmitter.Default ) → None

# [SOURce<HW>]:BB:GBAS:VDB<CH>:MCONfig:LFLocation:HEIGht
# get:
value: float = driver.source.bb.gbas.vdb.mconfig.lfLocation.height.get(vdbTransmitter = repcap.VdbTransmitter.Default)
# set:
driver.source.bb.gbas.vdb.mconfig.lfLocation.height.set(lf_height = 1.0, vdbTransmitter = repcap.VdbTransmitter.Default)

Requires ‘Mode > GBAS’ (LAAS) header information. Sets the LTP/FTP height.

Parameters:

• lf_height – float Range: -512 to 6041.5

• vdbTransmitter – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Vdb’)