Gain

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DRCChannel:GAIN

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(terminal=Terminal.Default) → float[source]

# [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DRCChannel:GAIN
value: float = driver.source.bb.evdo.terminal.drcChannel.gain.get(terminal = repcap.Terminal.Default)

(enabled for an access terminal working in traffic mode) Sets the gain of the Data Rate Control (DRC) channel relative to the pilot channel power.

Parameters:: terminal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)
Returns:: gain: float Range: -80 dB to 10 dB

set(gain: float, terminal=Terminal.Default) → None[source]

# [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DRCChannel:GAIN
driver.source.bb.evdo.terminal.drcChannel.gain.set(gain = 1.0, terminal = repcap.Terminal.Default)

(enabled for an access terminal working in traffic mode) Sets the gain of the Data Rate Control (DRC) channel relative to the pilot channel power.

Parameters:

gain – float Range: -80 dB to 10 dB
terminal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)