Drate

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DRATe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(terminal=Terminal.Default, packet=Packet.Default) → float[source]
# [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:DRATe
value: float = driver.source.bb.evdo.terminal.dchannel.packet.drate.get(terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for an access terminal working in traffic mode) Displays the data rate in kbps of the selected packet. Note: Configuration of Packet 2 and Packet 3 transmitted on the second and the third subframe, is only enabled for physical layer subtype 2.

Parameters:

  • terminal – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

  • packet – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

Returns:

drate: float Range: 0 to …