Sr

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:NIOT:TRANs<CH>:HARQ:SR
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userEquipment=UserEquipment.Default, transmission=Transmission.Default) → bool[source]
# [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:NIOT:TRANs<CH>:HARQ:SR
value: bool = driver.source.bb.eutra.uplink.ue.niot.trans.harq.sr.get(userEquipment = repcap.UserEquipment.Default, transmission = repcap.Transmission.Default)

If enabled, the SR symbols are block-wise multiplied with the CSR sequence.

Parameters:

  • userEquipment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

  • transmission – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trans’)

Returns:

nb_scheduling_req: 1 | ON | 0| OFF

set(nb_scheduling_req: bool, userEquipment=UserEquipment.Default, transmission=Transmission.Default) → None[source]
# [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:NIOT:TRANs<CH>:HARQ:SR
driver.source.bb.eutra.uplink.ue.niot.trans.harq.sr.set(nb_scheduling_req = False, userEquipment = repcap.UserEquipment.Default, transmission = repcap.Transmission.Default)

If enabled, the SR symbols are block-wise multiplied with the CSR sequence.

Parameters:

  • nb_scheduling_req – 1 | ON | 0| OFF

  • userEquipment – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

  • transmission – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trans’)