State

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:USER<CH>:ULCA<ST0>:STATe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userIx=UserIx.Default, ulCarriersNull=UlCarriersNull.Default) → bool[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:ULCA<ST0>:STATe
value: bool = driver.source.bb.eutra.downlink.user.ulca.state.get(userIx = repcap.UserIx.Default, ulCarriersNull = repcap.UlCarriersNull.Default)

Sets the state of the associated UL carriers, if carrier aggregation is enabled.

Parameters:

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • ulCarriersNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Ulca’)

Returns:

cu_ul_ca_state: 1 | ON | 0| OFF

set(cu_ul_ca_state: bool, userIx=UserIx.Default, ulCarriersNull=UlCarriersNull.Default) → None[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:ULCA<ST0>:STATe
driver.source.bb.eutra.downlink.user.ulca.state.set(cu_ul_ca_state = False, userIx = repcap.UserIx.Default, ulCarriersNull = repcap.UlCarriersNull.Default)

Sets the state of the associated UL carriers, if carrier aggregation is enabled.

Parameters:

  • cu_ul_ca_state – 1 | ON | 0| OFF

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • ulCarriersNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Ulca’)