Txm

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:TXM
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userIx=UserIx.Default, cellNull=CellNull.Default) → EutraTxMode[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:TXM
value: enums.EutraTxMode = driver.source.bb.eutra.downlink.user.cell.txm.get(userIx = repcap.UserIx.Default, cellNull = repcap.CellNull.Default)

Sets the transmission mode of the user.

Parameters:

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

Returns:

tx_mode: USER | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | M9 | M10 | M10

set(tx_mode: EutraTxMode, userIx=UserIx.Default, cellNull=CellNull.Default) → None[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:TXM
driver.source.bb.eutra.downlink.user.cell.txm.set(tx_mode = enums.EutraTxMode.M1, userIx = repcap.UserIx.Default, cellNull = repcap.CellNull.Default)

Sets the transmission mode of the user.

Parameters:

  • tx_mode – USER | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | M9 | M10 | M10

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)