State

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:DMRS:STATe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(userIx=UserIx.Default, cellNull=CellNull.Default) → bool[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:DMRS:STATe
value: bool = driver.source.bb.eutra.downlink.user.cell.dmrs.state.get(userIx = repcap.UserIx.Default, cellNull = repcap.CellNull.Default)

Sets the value of the higher-layer parameter dmrs-tableAlt.

Parameters:

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

Returns:

dmrs_alt_table: 1 | ON | 0| OFF

set(dmrs_alt_table: bool, userIx=UserIx.Default, cellNull=CellNull.Default) → None[source]
# [SOURce<HW>]:BB:EUTRa:DL:USER<CH>:CELL<ST0>:DMRS:STATe
driver.source.bb.eutra.downlink.user.cell.dmrs.state.set(dmrs_alt_table = False, userIx = repcap.UserIx.Default, cellNull = repcap.CellNull.Default)

Sets the value of the higher-layer parameter dmrs-tableAlt.

Parameters:

  • dmrs_alt_table – 1 | ON | 0| OFF

  • userIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)