UlDlConf

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:ULDLconf

class UlDlConfCls

UlDlConf commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(subframeNull=SubframeNull.Default, itemNull=ItemNull.Default) → str

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:ULDLconf
value: str = driver.source.bb.eutra.downlink.subf.encc.pdcch.extc.item.dciConf.ulDlConf.get(subframeNull = repcap.SubframeNull.Default, itemNull = repcap.ItemNull.Default)

Sets the UL/DL configuration numbers. Each UL/DL configuration number consists of 3 bits and indicates one of the configurations listed in Figure ‘Uplink-downlink configurations’.

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param itemNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Item’)

return

dci_ul_dl_conf: 64 bits

set(dci_ul_dl_conf: str, subframeNull=SubframeNull.Default, itemNull=ItemNull.Default) → None

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:ULDLconf
driver.source.bb.eutra.downlink.subf.encc.pdcch.extc.item.dciConf.ulDlConf.set(dci_ul_dl_conf = rawAbc, subframeNull = repcap.SubframeNull.Default, itemNull = repcap.ItemNull.Default)

Sets the UL/DL configuration numbers. Each UL/DL configuration number consists of 3 bits and indicates one of the configurations listed in Figure ‘Uplink-downlink configurations’.

param dci_ul_dl_conf

64 bits

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param itemNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Item’)