DpOffset

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:DPOFfset
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(subframeNull=SubframeNull.Default, itemNull=ItemNull.Default) → bool[source]
# [SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:DPOFfset
value: bool = driver.source.bb.eutra.downlink.subf.encc.pdcch.extc.item.dciConf.dpOffset.get(subframeNull = repcap.SubframeNull.Default, itemNull = repcap.ItemNull.Default)

Sets the DCI Format 1D field downlink power offset.

Parameters:

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • itemNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Item’)

Returns:

dp_offset: 1 | ON | 0| OFF

set(dp_offset: bool, subframeNull=SubframeNull.Default, itemNull=ItemNull.Default) → None[source]
# [SOURce<HW>]:BB:EUTRa:DL:[SUBF<ST0>]:ENCC:PDCCh:EXTC:ITEM<CH0>:DCIConf:DPOFfset
driver.source.bb.eutra.downlink.subf.encc.pdcch.extc.item.dciConf.dpOffset.set(dp_offset = False, subframeNull = repcap.SubframeNull.Default, itemNull = repcap.ItemNull.Default)

Sets the DCI Format 1D field downlink power offset.

Parameters:

  • dp_offset – 1 | ON | 0| OFF

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • itemNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Item’)