ThConfig#

SCPI Commands :

[SOURce<HW>]:BB:DVB:DVBX:THConfig:CCOunter
[SOURce<HW>]:BB:DVB:DVBX:THConfig:PUS
[SOURce<HW>]:BB:DVB:DVBX:THConfig:SCONtrol
[SOURce<HW>]:BB:DVB:DVBX:THConfig:TPRiority
[SOURce<HW>]:BB:DVB:DVBX:THConfig:[STATe]

Commands in total: 9
Subgroups: 4
Direct child commands: 5

get_ccounter ( ) → int

set_ccounter ( ccounter: int ) → None

# [SOURce<HW>]:BB:DVB:DVBX:THConfig:CCOunter
# get:
value: int = driver.source.bb.dvb.dvbx.thConfig.get_ccounter()
# set:
driver.source.bb.dvb.dvbx.thConfig.set_ccounter(ccounter = 1)

Sets the sequence number of the first payload packet.

Parameters:: ccounter – integer Range: 0 to 15

get_pus ( ) → bool

set_pus ( psu_indication: bool ) → None

# [SOURce<HW>]:BB:DVB:DVBX:THConfig:PUS
# get:
value: bool = driver.source.bb.dvb.dvbx.thConfig.get_pus()
# set:
driver.source.bb.dvb.dvbx.thConfig.set_pus(psu_indication = False)

If enabled, the PES (packetized elementary streams) , PSI (program specific information) , or DVB-MIP (megaframe initialization) packet begin immediately after the header.

Parameters:: psu_indication – 1 | ON | 0| OFF

get_scontrol ( ) → int

set_scontrol ( scontrol: int ) → None

# [SOURce<HW>]:BB:DVB:DVBX:THConfig:SCONtrol
# get:
value: int = driver.source.bb.dvb.dvbx.thConfig.get_scontrol()
# set:
driver.source.bb.dvb.dvbx.thConfig.set_scontrol(scontrol = 1)

Sets the scrambling information.

Parameters:: scontrol – integer Range: 0 to 3

get_state ( ) → bool

set_state ( state: bool ) → None

# [SOURce<HW>]:BB:DVB:DVBX:THConfig:[STATe]
# get:
value: bool = driver.source.bb.dvb.dvbx.thConfig.get_state()
# set:
driver.source.bb.dvb.dvbx.thConfig.set_state(state = False)

Inserts header information in the transport stream.

Parameters:: state – 1 | ON | 0| OFF

get_tpriority ( ) → int

set_tpriority ( tpriority: int ) → None

# [SOURce<HW>]:BB:DVB:DVBX:THConfig:TPRiority
# get:
value: int = driver.source.bb.dvb.dvbx.thConfig.get_tpriority()
# set:
driver.source.bb.dvb.dvbx.thConfig.set_tpriority(tpriority = 1)

Marks the current packet as high priority packet compared to packets with the same PID.

Parameters:: tpriority – integer Range: 0 to 1

Cloning the Group

# Create a copy of the original group, that exists independently
thConfig_copy = driver.source.bb.dvb.dvbx.thConfig.clone()

Subgroups