TypePy

SCPI Command :

[SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:TYPE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(mobileStation=MobileStation.Default, channel=Channel.Default) → Cdma2KchanTypeUp[source]
# [SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:TYPE
value: enums.Cdma2KchanTypeUp = driver.source.bb.c2K.mstation.channel.typePy.get(mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

The command queries the channel type. The channel type depends on the selected operating mode and, for the sub channels of the traffic channel, from the selected radio configuration.

Parameters:

  • mobileStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

  • channel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)

Returns:

type_py: R-PICH | R-ACH | R-EACH | R-CCCH | R-DCCH | R-FCH | R-SCCH | R-SCH2 | R-SCH1 R-ACH Access Channel. R-EACH Enhanced Access Channel R-CCCH Common Control Channel R-PICH Pilot Channel. R-DCCH Dedicated Control Channel R-FCH Fundamental Channel R-SCHx Supplemental Channel 1 | 2 R-SCCH Supplemental Control Channel