Power

SCPI Command :

[SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer
class PowerCls[source]

Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default, channel=Channel.Default) float[source]
# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer
value: float = driver.source.bb.c2K.mstation.channel.power.get(mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param mobileStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)

return:

power: float Range: -80 to 0

set(power: float, mobileStation=MobileStation.Default, channel=Channel.Default) None[source]
# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer
driver.source.bb.c2K.mstation.channel.power.set(power = 1.0, mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param power:

float Range: -80 to 0

param mobileStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)