Rconfiguration

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:RCONfiguration
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, groupNull=GroupNull.Default) → Cdma2KradioConf[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:RCONfiguration
value: enums.Cdma2KradioConf = driver.source.bb.c2K.bstation.cgroup.rconfiguration.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default)

Selects the radio configuration for the traffic channel. The settings of the channel table parameters are specific for the selected radio configuration.

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

Returns:

rconfiguration: 1 | 2| 3 | 4| 5

set(rconfiguration: Cdma2KradioConf, baseStation=BaseStation.Default, groupNull=GroupNull.Default) → None[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:RCONfiguration
driver.source.bb.c2K.bstation.cgroup.rconfiguration.set(rconfiguration = enums.Cdma2KradioConf._1, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default)

Selects the radio configuration for the traffic channel. The settings of the channel table parameters are specific for the selected radio configuration.

Parameters:

  • rconfiguration – 1 | 2| 3 | 4| 5

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)