Wcode

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:WCODe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → int[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:WCODe
value: int = driver.source.bb.c2K.bstation.cgroup.coffset.wcode.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Assigns the Walsh Code to the channel. The standard assigns a fixed walsh code to some channels (F-PICH, for example, always uses Walsh code 0) . Generally, the Walsh code can only be varied within the range specified by the standard. For the traffic channels, this value is specific for the selected radio configuration. The value range of the Walsh code depends on the frame length, the channel coding type and the data rate. If one of these parameters is changed so that the set Walsh code gets invalid, the next permissible value is automatically set.

Parameters:

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

  • offset – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

Returns:

wcode: integer Range: 0 to 255

set(wcode: int, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None[source]
# [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:WCODe
driver.source.bb.c2K.bstation.cgroup.coffset.wcode.set(wcode = 1, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Assigns the Walsh Code to the channel. The standard assigns a fixed walsh code to some channels (F-PICH, for example, always uses Walsh code 0) . Generally, the Walsh code can only be varied within the range specified by the standard. For the traffic channels, this value is specific for the selected radio configuration. The value range of the Walsh code depends on the frame length, the channel coding type and the data rate. If one of these parameters is changed so that the set Walsh code gets invalid, the next permissible value is automatically set.

Parameters:

  • wcode – integer Range: 0 to 255

  • baseStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

  • groupNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

  • offset – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)