Power

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:POWer

class PowerCls

Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → float

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:POWer
value: float = driver.source.bb.c2K.bstation.cgroup.coffset.power.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param baseStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return:

power: float Range: -80 to depends on channel

set(power: float, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:POWer
driver.source.bb.c2K.bstation.cgroup.coffset.power.set(power = 1.0, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param power:

float Range: -80 to depends on channel

param baseStation:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)