Mode

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:CCODing:MODE

class ModeCls

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → RsSmw.enums.Cdma2KcodMode

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:CCODing:MODE
value: enums.Cdma2KcodMode = driver.source.bb.c2K.bstation.cgroup.coffset.ccoding.mode.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Selects channel coding mode. For the traffic channels, this value is specific for the selected radio configuration.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

mode: OFF| COMPlete| NOINterleaving| OINTerleaving OFF Channel coding is deactivated. COMPlete The complete channel coding is performed. The channel coding procedure can slightly vary depending on channel type, frame length and data rate. OINTerleaving Except for the block interleaver, the whole channel coding procedure is carried out. In this mode, the frame structure and the convolutional coder of a receiver can be tested. NOINterleaving In this mode, only block interleaver is used for coding. This allows the deinterleaver in the receiver to be tested independently of the remaining (de-) coding process.

set(mode: RsSmw.enums.Cdma2KcodMode, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:CCODing:MODE
driver.source.bb.c2K.bstation.cgroup.coffset.ccoding.mode.set(mode = enums.Cdma2KcodMode.COMPlete, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Selects channel coding mode. For the traffic channels, this value is specific for the selected radio configuration.

param mode

OFF| COMPlete| NOINterleaving| OINTerleaving OFF Channel coding is deactivated. COMPlete The complete channel coding is performed. The channel coding procedure can slightly vary depending on channel type, frame length and data rate. OINTerleaving Except for the block interleaver, the whole channel coding procedure is carried out. In this mode, the frame structure and the convolutional coder of a receiver can be tested. NOINterleaving In this mode, only block interleaver is used for coding. This allows the deinterleaver in the receiver to be tested independently of the remaining (de-) coding process.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)