Lcod

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get_state() → bool[source]

# [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:LCOD:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.tphys.lcod.get_state()

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

Returns:: tphys: 1 | ON | 0| OFF