State

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L1M<CH>:STATe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(channel=Channel.Default) → bool[source]

# [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:TPHYs:L1M<CH>:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.tphys.l1M.state.get(channel = repcap.Channel.Default)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

Parameters:: channel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘L1M’)
Returns:: tphys: 1 | ON | 0| OFF