Mmode

SCPI Command :

[SOURce<HW>]:BB:BTOoth:CS:[SEVent<CH0>]:MMODe

class MmodeCls

Mmode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default) → BtoCsMainMode

# SCPI: [SOURce<HW>]:BB:BTOoth:CS:[SEVent<CH0>]:MMODe
value: enums.BtoCsMainMode = driver.source.bb.btooth.cs.sevent.mmode.get(channelNull = repcap.ChannelNull.Default)

Sets the main mode for the first subevent SEVent0. All following subevents use the same main mode. For an overview on available submodes per main mode, see Table ‘CS step main modes and submodes’.

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Sevent’)

return:

main_mode: MODE1| MODE2| MODE3 MODE1 Mode-1 mode with no submode available. MODE2 Mode-2 mode with submodes Mode-1 and Mode-3 available. MODE3 Mode-3 mode with submodes Mode-1 and Mode-2 available.

set(main_mode: BtoCsMainMode, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:BTOoth:CS:[SEVent<CH0>]:MMODe
driver.source.bb.btooth.cs.sevent.mmode.set(main_mode = enums.BtoCsMainMode.MODE1, channelNull = repcap.ChannelNull.Default)

Sets the main mode for the first subevent SEVent0. All following subevents use the same main mode. For an overview on available submodes per main mode, see Table ‘CS step main modes and submodes’.

param main_mode:

MODE1| MODE2| MODE3 MODE1 Mode-1 mode with no submode available. MODE2 Mode-2 mode with submodes Mode-1 and Mode-3 available. MODE3 Mode-3 mode with submodes Mode-1 and Mode-2 available.

param channelNull:

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Sevent’)