Center

SCPI Command :

[SOURce<HW>]:AWGN:FREQuency:CENTer:OFFSet

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get_offset() → float

# [SOURce<HW>]:AWGN:FREQuency:CENTer:OFFSet
value: float = driver.source.awgn.frequency.center.get_offset()

Defines the frequency offset of the noise signal relative to the carrier center frequency.

Returns:

center_freq_offset: float Range: -40E6 to 40E6

set_offset(center_freq_offset: float) → None

# [SOURce<HW>]:AWGN:FREQuency:CENTer:OFFSet
driver.source.awgn.frequency.center.set_offset(center_freq_offset = 1.0)

Defines the frequency offset of the noise signal relative to the carrier center frequency.

Parameters:

center_freq_offset – float Range: -40E6 to 40E6