Source

SCPI Command :

[SOURce<HW>]:AM<CH>:SOURce

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(generatorIx=GeneratorIx.Default) → AmSour[source]

# [SOURce<HW>]:AM<CH>:SOURce
value: enums.AmSour = driver.source.am.source.get(generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for amplitude modulation.

Parameters:: generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Am’)
Returns:: source: LF1 | LF2 | NOISe | EXT1 | EXT2 | EXTernal | INTernal LF1 | LF2 Uses an internally generated LF signal. EXT1 | EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .

set(source: AmSour, generatorIx=GeneratorIx.Default) → None[source]

# [SOURce<HW>]:AM<CH>:SOURce
driver.source.am.source.set(source = enums.AmSour.EXT1, generatorIx = repcap.GeneratorIx.Default)

Selects the modulation source for amplitude modulation.

Parameters:

source – LF1 | LF2 | NOISe | EXT1 | EXT2 | EXTernal | INTernal LF1 | LF2 Uses an internally generated LF signal. EXT1 | EXT2 Uses an externally supplied LF signal. NOISe Uses the internally generated noise signal. INTernal Uses the internally generated signal of LF1. EXTernal Uses an external LF signal (EXT1) .
generatorIx – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Am’)