Trigger:Psweep:Immediate#
SCPI Commands
- TRIGger<HW>:PSWeep:[IMMediate]
Direct SCPI Members
- void Perform ( InputIxRepCap inputIx )#
- void PerformAndWait ( InputIxRepCap inputIx )#
- void PerformAndWait ( InputIxRepCap inputIx, int opcTimeoutMs )
// SCPI: TRIGger<HW>:PSWeep:[IMMediate] driver.Trigger.Psweep.Immediate.Perform(InputIxRepCap.Default); driver.Trigger.Psweep.Immediate.PerformAndWait(InputIxRepCap.Default); driver.Trigger.Psweep.Immediate.PerformAndWait(InputIxRepCap.Default, 1000);Performs a single sweep and immediately starts the activated, corresponding sweep:
FSWeep - RF frequency
PSWeep - RF level
LFFSweep - LF frequency
SWEep - all sweeps
Effective in the following configuration:
TRIG:FSW | LFFS | PSW|[:SWE]:SOUR SING
SOUR:SWE:FREQ | POW:MODE AUTO or SOUR:LFO:SWE:[FREQ:]MODE AUTO
Alternatively, you can use the IMMediate command instead of the respective SWEep:[FREQ:]|POW:EXECute command.
inputIxRepeated capability selectorPerformAndWait is the same as Perform, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.