Trigger:FreqSweep:Source#
SCPI Commands
- TRIGger<HW>:FSWeep:SOURce
Direct SCPI Members
- SingExtAutoEnum Get ( )#
- SingExtAutoEnum Get ( InputIxRepCap inputIx )
- void Set ( SingExtAutoEnum source )#
- void Set ( SingExtAutoEnum source, InputIxRepCap inputIx )
// SCPI: TRIGger<HW>:FSWeep:SOURce // Get: SingExtAutoEnum value = driver.Trigger.FreqSweep.Source.Get(); SingExtAutoEnum value = driver.Trigger.FreqSweep.Source.Get(InputIxRepCap.Default); // Set: driver.Trigger.FreqSweep.Source.Set(SingExtAutoEnum.AUTO, InputIxRepCap.Default); driver.Trigger.FreqSweep.Source.Set(SingExtAutoEnum.AUTO);
Selects the trigger source for the corresponding sweeps:
FSWeep - RF frequency
LFFSweep - LF frequency
PSWeep - RF level
SWEep - all sweeps
The source names of the parameters correspond to the values provided in manual control of the instrument. They differ from the SCPI-compliant names, but the instrument accepts both variants. Use the SCPI name, if compatibility is an important issue. Find the corresponding SCPI-compliant commands in .
sourceAUTO | IMMediate | SINGle | BUS | EXTernal | EAUToAUTO [IMMediate]: Executes a sweep automatically.In this free-running mode, the trigger condition is met continuously. I.e. when a sweep is completed, the next one starts immediately.
SINGle [BUS]: Executes one complete sweep cycle.The following commands initiate a trigger event:*TRG[:SOURcehw]:SWEep:POWer:EXECute[:SOURcehw]:SWEep[:FREQuency]:EXECute:TRIGgerhw[:SWEep][:IMMediate], :TRIGgerhw:PSWeep[:IMMediate] and :TRIGgerhw:FSWeep[:IMMediate].Set the sweep mode with the commands:[:SOURcehw]:SWEep:POWer:MODEAUTO | STEP[:SOURcehw]:SWEep[:FREQuency]:MODEAUTO | STEP[:SOURcehw]:LFOutput:SWEep[:FREQuency]:MODEAUTO | STEPIn step mode (STEP) , the instrument executes only one step.
EXTernal: An external signal triggers the sweep.
EAUTo: An external signal triggers the sweep. When one sweep is finished, the next sweep starts.A second trigger event stops the sweep at the current frequency, a third trigger event starts the trigger at the start frequency, and so on.
inputIxRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.