Source:Roscillator:Internal:Adjust#
SCPI Commands
- [SOURce]:ROSCillator:[INTernal]:ADJust:VALue
- [SOURce]:ROSCillator:[INTernal]:ADJust:[STATe]
Direct SCPI Members
- int Value#
// SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:VALue int value = driver.Source.Roscillator.Internal.Adjust.Value; driver.Source.Roscillator.Internal.Adjust.Value = 1;Specifies the frequency correction value (adjustment value) .
value: integer
- bool State#
// SCPI: [SOURce]:ROSCillator:[INTernal]:ADJust:[STATe] bool value = driver.Source.Roscillator.Internal.Adjust.State; driver.Source.Roscillator.Internal.Adjust.State = false;Determines whether the calibrated (off) or a user-defined (on) adjustment value is used for fine adjustment of the frequency.
state: 1 | ON | 0| OFF
0: Fine adjustment with the calibrated frequency value
1: User-defined adjustment value.The instrument is no longer in the calibrated state.The calibration value is, however, not changed. The instrument resumes the calibrated state if you send SOURce:ROSCillator:INTernal:ADJust:STATe 0.