Source:Regenerator:Simulation:Level:Apply#

SCPI Commands

[SOURce<HW>]:REGenerator:SIMulation:LEVel:APPLy

Direct SCPI Members

void Set ( )#
void SetAndWait ( )#
void SetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:REGenerator:SIMulation:LEVel:APPLy
driver.Source.Regenerator.Simulation.Level.Apply.Set();
driver.Source.Regenerator.Simulation.Level.Apply.SetAndWait();
driver.Source.Regenerator.Simulation.Level.Apply.SetAndWait(1000);

Sets the output level at the dedicated connector to the calculated level. To query the calculated level, use the command method RsSmw.Source.Regenerator.Simulation.Level.Get.

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.