Source:Regenerator:Restart#

SCPI Commands

[SOURce<HW>]:REGenerator:RESTart:MODE
[SOURce<HW>]:REGenerator:RESTart:RMODe
[SOURce<HW>]:REGenerator:RESTart:SOURce
[SOURce<HW>]:REGenerator:RESTart:STATtenuation

Cloning the Group

// Create a clone of the original group, that exists independently
var restart2 = driver.Source.Regenerator.Restart.Clone();

Direct SCPI Members

RegTrigModeEnum Mode#
// SCPI: [SOURce<HW>]:REGenerator:RESTart:MODE
RegTrigModeEnum value = driver.Source.Regenerator.Restart.Mode;
driver.Source.Regenerator.Restart.Mode = RegTrigModeEnum.AAUTo;

Selects the event which leads to a restart of the REG simulation.

mode: AUTO | AAUTo

  • AUTO: The signal generation starts after the REG is enabled. The signal is generated continuously; all configured objects are simulated.

  • AAUT: Simulation starts upon trigger event ([:SOURcehw]:REGenerator:RESTart:EXECute) . Then the signal is generated continuously; all configured objects are simulated.


TrigRunModeEnum Rmode#
// SCPI: [SOURce<HW>]:REGenerator:RESTart:RMODe
TrigRunModeEnum value = driver.Source.Regenerator.Restart.Rmode;

Queries the status of signal generation for all trigger modes.

rmode: STOP | RUN


TrigSourRegEnum Source#
// SCPI: [SOURce<HW>]:REGenerator:RESTart:SOURce
TrigSourRegEnum value = driver.Source.Regenerator.Restart.Source;
driver.Source.Regenerator.Restart.Source = TrigSourRegEnum.ERRTA;

Selects the trigger signal source and determines the way the triggering is executed.

source: INTernal | ERRTA | ERRTB

  • INTernal: Internal triggering by the command [:SOURcehw]:REGenerator:RESTart:EXECute.

  • ERRTA | ERRTB: External trigger signal via one of the external global trigger connectors.See [:SOURce]:INPut:USERch:SIGNal.


double StAttenuation#
// SCPI: [SOURce<HW>]:REGenerator:RESTart:STATtenuation
double value = driver.Source.Regenerator.Restart.StAttenuation;
driver.Source.Regenerator.Restart.StAttenuation = 1.0;

If method RsSmw.Source.Regenerator.Restart.Mode AAUT, sets the attenuation applied on the output signal during the time the signal generation is stopped.

stopTimeAtt: float


Subgroups