Source:Pgenerator:Output#

SCPI Commands

[SOURce<HW>]:PGENerator:OUTPut:POLarity
[SOURce<HW>]:PGENerator:OUTPut:[STATe]

Direct SCPI Members

NormalInvertedEnum Polarity#
// SCPI: [SOURce<HW>]:PGENerator:OUTPut:POLarity
NormalInvertedEnum value = driver.Source.Pgenerator.Output.Polarity;
driver.Source.Pgenerator.Output.Polarity = NormalInvertedEnum.INVerted;

Sets the polarity of the pulse output signal.

polarity: NORMal | INVerted

  • NORMal: Outputs the pulse signal during the pulse width, that means during the high state.

  • INVerted: Inverts the pulse output signal polarity. The pulse output signal is suppressed during the pulse width, but provided during the low state.


bool State#
// SCPI: [SOURce<HW>]:PGENerator:OUTPut:[STATe]
bool value = driver.Source.Pgenerator.Output.State;
driver.Source.Pgenerator.Output.State = false;

Activates the output of the pulse modulation signal.

state: 1 | ON | 0| OFF