Source:Input:Tm:Trigger#
SCPI Commands
- [SOURce<HW>]:INPut:TM:TRIGger:IMPedance
- [SOURce<HW>]:INPut:TM:TRIGger:LEVel
- [SOURce<HW>]:INPut:TM:TRIGger:SLOPe
Direct SCPI Members
- ImpG50G1Kenum Impedance#
// SCPI: [SOURce<HW>]:INPut:TM:TRIGger:IMPedance ImpG50G1Kenum value = driver.Source.Input.Tm.Trigger.Impedance; driver.Source.Input.Tm.Trigger.Impedance = ImpG50G1Kenum.G1K;Selects the input impedance for the external trigger/clock inputs.
impedance: G50 | G1K
G50: 50 Ω per ground
G1K: 1 kΩ per ground
G10K: For backward compatibility with other Rohde & Schwarz signal generators. The R&S SMW200A maps this value to G1K.
- double Level#
// SCPI: [SOURce<HW>]:INPut:TM:TRIGger:LEVel double value = driver.Source.Input.Tm.Trigger.Level; driver.Source.Input.Tm.Trigger.Level = 1.0;Sets the high/low threshold in volts for the trigger and clock signal inputs of the baseband section.
level: float
- SlopeTypeEnum Slope#
// SCPI: [SOURce<HW>]:INPut:TM:TRIGger:SLOPe SlopeTypeEnum value = driver.Source.Input.Tm.Trigger.Slope; driver.Source.Input.Tm.Trigger.Slope = SlopeTypeEnum.NEGative;Sets the polarity of the active slope of an externally applied trigger signal.
slope: NEGative | POSitive