Source:Input:Tm:Clock#

SCPI Commands

[SOURce<HW>]:INPut:TM:CLOCk:IMPedance
[SOURce<HW>]:INPut:TM:CLOCk:LEVel
[SOURce<HW>]:INPut:TM:CLOCk:SLOPe

Direct SCPI Members

ImpG50G1Kenum Impedance#
// SCPI: [SOURce<HW>]:INPut:TM:CLOCk:IMPedance
ImpG50G1Kenum value = driver.Source.Input.Tm.Clock.Impedance;
driver.Source.Input.Tm.Clock.Impedance = ImpG50G1Kenum.G1K;

Selects the input impedance for the external trigger/clock inputs.

impedance: G50 | G1K

  • G50: 50 Ω per ground

  • G1K: 1 kΩ per ground

  • G10K: For backward compatibility with other Rohde & Schwarz signal generators. The R&S SMW200A maps this value to G1K.


double Level#
// SCPI: [SOURce<HW>]:INPut:TM:CLOCk:LEVel
double value = driver.Source.Input.Tm.Clock.Level;
driver.Source.Input.Tm.Clock.Level = 1.0;

Sets the high/low threshold in volts for the trigger and clock signal inputs of the baseband section.

level: float


SlopeTypeEnum Slope#
// SCPI: [SOURce<HW>]:INPut:TM:CLOCk:SLOPe
SlopeTypeEnum value = driver.Source.Input.Tm.Clock.Slope;
driver.Source.Input.Tm.Clock.Slope = SlopeTypeEnum.NEGative;

Sets the polarity of the active slope of an externally applied clock signal.

slope: NEGative | POSitive