Source:Fsimulator:TcInterferer:Reference#

SCPI Commands

[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:FRATio
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:LOSS
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:MMODe
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:PROFile
[SOURce<HW>]:FSIMulator:TCINterferer:REFerence:STATe

Cloning the Group

// Create a clone of the original group, that exists independently
var reference2 = driver.Source.Fsimulator.TcInterferer.Reference.Clone();

Direct SCPI Members

double Fratio#
// SCPI: [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:FRATio
double value = driver.Source.Fsimulator.TcInterferer.Reference.Fratio;
driver.Source.Fsimulator.TcInterferer.Reference.Fratio = 1.0;

Sets the ratio of the actual Doppler frequency to the set Doppler frequency for the reference and moving path with 2 channel interferer fading.

fratio: float


double Loss#
// SCPI: [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:LOSS
double value = driver.Source.Fsimulator.TcInterferer.Reference.Loss;
driver.Source.Fsimulator.TcInterferer.Reference.Loss = 1.0;

Seta the loss of the reference and moving path with 2 channel interferer fading.

loss: float


Fad2CitfModeEnum Mmode#
// SCPI: [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:MMODe
Fad2CitfModeEnum value = driver.Source.Fsimulator.TcInterferer.Reference.Mmode;
driver.Source.Fsimulator.TcInterferer.Reference.Mmode = Fad2CitfModeEnum.HOPPing;

Selects the type of moving applied to the moving path.

mmode: SLIDing | HOPPing


FadingProfileBenum Profile#
// SCPI: [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:PROFile
FadingProfileBenum value = driver.Source.Fsimulator.TcInterferer.Reference.Profile;
driver.Source.Fsimulator.TcInterferer.Reference.Profile = FadingProfileBenum.BELLindoor;

Sets the fading profile to be used for the reference and moving path with 2 channel interferer fading.

profile: SPATh | PDOPpler | RAYLeigh


bool State#
// SCPI: [SOURce<HW>]:FSIMulator:TCINterferer:REFerence:STATe
bool value = driver.Source.Fsimulator.TcInterferer.Reference.State;
driver.Source.Fsimulator.TcInterferer.Reference.State = false;

Activate the reference and moving path of the 2 channel interferer fading configuration. The 2 channel interferer fading configuration and the fading simulator must be switched on separately, see method RsSmw.Source.Fsimulator.TcInterferer.State and .method RsSmw.Source.Fsimulator.State

state: 1 | ON | 0| OFF


Subgroups