Source:Fsimulator:HsTrain#
SCPI Commands
- [SOURce<HW>]:FSIMulator:HSTRain:FDOPpler
- [SOURce<HW>]:FSIMulator:HSTRain:KFACtor
- [SOURce<HW>]:FSIMulator:HSTRain:PROFile
- [SOURce<HW>]:FSIMulator:HSTRain:SOFFset
- [SOURce<HW>]:FSIMulator:HSTRain:SPEed
- [SOURce<HW>]:FSIMulator:HSTRain:STATe
Cloning the Group
// Create a clone of the original group, that exists independently
var hsTrain2 = driver.Source.Fsimulator.HsTrain.Clone();
Direct SCPI Members
- double Fdoppler#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:FDOPpler double value = driver.Source.Fsimulator.HsTrain.Fdoppler;Queries the maximum Doppler Shift for the selected configuration.
fdoppler: float
- double Kfactor#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:KFACtor double value = driver.Source.Fsimulator.HsTrain.Kfactor; driver.Source.Fsimulator.HsTrain.Kfactor = 1.0;Sets the Rician factor K for high-speed train scenario 2.
kfactor: float
- FadingProfileBenum Profile#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:PROFile FadingProfileBenum value = driver.Source.Fsimulator.HsTrain.Profile; driver.Source.Fsimulator.HsTrain.Profile = FadingProfileBenum.BELLindoor;Determines the fading profile for the selected scenario. The fading profile determines which transmission path is simulated.
profile: SPATh | PDOPpler | RAYLeigh
- double Soffset#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:SOFFset double value = driver.Source.Fsimulator.HsTrain.Soffset; driver.Source.Fsimulator.HsTrain.Soffset = 1.0;Shifts the high speed train profile in time. The maximum possible shift is calculated as max = 2*DS/v ,where:
DS is the distance in meters between the train and the BS at the beginning of the simulation
v is the velocity of the train in m/s
startOffset: float
- double Speed#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:SPEed double value = driver.Source.Fsimulator.HsTrain.Speed; driver.Source.Fsimulator.HsTrain.Speed = 1.0;Sets the velocity parameter , i.e. the speed of the moving receiver in m/s.
speed: float
- bool State#
// SCPI: [SOURce<HW>]:FSIMulator:HSTRain:STATe bool value = driver.Source.Fsimulator.HsTrain.State; driver.Source.Fsimulator.HsTrain.State = false;Activates/deactivates simulation of High Speed Train propagation according to the selected scenario 1 or 3.
state: 1 | ON | 0| OFF
Subgroups