Source:Correction:Fresponse:Rf:User#

SCPI Commands

[SOURce<HW>]:CORRection:FRESponse:RF:USER:LOAD
[SOURce<HW>]:CORRection:FRESponse:RF:USER:PRESet
[SOURce<HW>]:CORRection:FRESponse:RF:USER:STORe
[SOURce<HW>]:CORRection:FRESponse:RF:USER:[STATe]

Cloning the Group

// Create a clone of the original group, that exists independently
var user2 = driver.Source.Correction.Fresponse.Rf.User.Clone();

Direct SCPI Members

string Load#
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:LOAD
string value = driver.Source.Correction.Fresponse.Rf.User.Load;
driver.Source.Correction.Fresponse.Rf.User.Load = "abc";

Loads the selected file from the default or the specified directory. Loaded are files with extension freqresp. Refer to for general information on file handling in the default and in a specific directory.

freqRespRfRcl: Filename or complete file path; file extension can be omitted.


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:PRESet
driver.Source.Correction.Fresponse.Rf.User.Preset();
driver.Source.Correction.Fresponse.Rf.User.PresetAndWait();
driver.Source.Correction.Fresponse.Rf.User.PresetAndWait(1000);

Sets the parameters to their default values (*RST values specified for the commands) . Not affected is the state set with the command method RsSmw.Source.Correction.Fresponse.Rf.User.State.

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


string Store#
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:STORe
string value = driver.Source.Correction.Fresponse.Rf.User.Store;
driver.Source.Correction.Fresponse.Rf.User.Store = "abc";

Saves the current settings into the selected file; the file extension (freqresp) is assigned automatically. Refer to for general information on file handling in the default and in a specific directory.

freqRespRfSave: Filename or complete file path


bool State#
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:USER:[STATe]
bool value = driver.Source.Correction.Fresponse.Rf.User.State;
driver.Source.Correction.Fresponse.Rf.User.State = false;

Enables the frequency response correction.

freqRespState: 1 | ON | 0| OFF


Subgroups