Source:Correction:Fresponse:Rf:Optimization:Bandwidth#

SCPI Commands

[SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:BANDwidth:MODE
[SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:BANDwidth:[VALue]

Direct SCPI Members

AutoManualModeEnum Mode#
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:BANDwidth:MODE
AutoManualModeEnum value = driver.Source.Correction.Fresponse.Rf.Optimization.Bandwidth.Mode;
driver.Source.Correction.Fresponse.Rf.Optimization.Bandwidth.Mode = AutoManualModeEnum.AUTO;

For high-quality I/Q modulation optimizations, sets the mode to set the signal bandwidth To enable these optimizations, see the following command: method RsSmw.Source.Correction.Fresponse.Rf.Optimization.Mode

freqRespOptBwMo: AUTO | MANual

  • AUTO: Automatic bandwidth settings

  • MANual: Manual bandwidth setting via the following command:[:SOURcehw]:CORRection:FRESponse:RF:OPTimization:BANDwidth[:VALue]


int Value#
// SCPI: [SOURce<HW>]:CORRection:FRESponse:RF:OPTimization:BANDwidth:[VALue]
int value = driver.Source.Correction.Fresponse.Rf.Optimization.Bandwidth.Value;
driver.Source.Correction.Fresponse.Rf.Optimization.Bandwidth.Value = 1;

Sets the signal compensation for manual bandwidth mode. See method RsSmw.Source.Correction.Fresponse.Rf.Optimization.Bandwidth.Mode. For more information, refer to the specifications document.

freqRespOptBwVa: integer