Sconfiguration:External:Remote:Scan#

SCPI Commands

SCONfiguration:EXTernal:REMote:SCAN
SCONfiguration:EXTernal:REMote:SCAN:STATe

Direct SCPI Members

void Set ( )#
void SetAndWait ( )#
void SetAndWait ( int opcTimeoutMs )
// SCPI: SCONfiguration:EXTernal:REMote:SCAN
driver.Sconfiguration.External.Remote.Scan.Set();
driver.Sconfiguration.External.Remote.Scan.SetAndWait();
driver.Sconfiguration.External.Remote.Scan.SetAndWait(1000);

Scans the network for connected instruments.

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


bool State#
// SCPI: SCONfiguration:EXTernal:REMote:SCAN:STATe
bool value = driver.Sconfiguration.External.Remote.Scan.State;

Queries if scanning is performed or not. To start the scanning process, use the command method RsSmw.Sconfiguration.External.Remote.Scan.Set.

scanState: 1 | ON | 0| OFF

  • 1: Scanning process running

  • 0: Not scanning