Format#

SCPI Commands

FORMat:BORDer
FORMat:SREGister
FORMat:[DATA]

Direct SCPI Members

ByteOrderEnum Border#
// SCPI: FORMat:BORDer
ByteOrderEnum value = driver.Format.Border;
driver.Format.Border = ByteOrderEnum.NORMal;

Determines the sequence of bytes within a binary block. This only affects blocks which use the IEEE754 format internally.

border: NORMal | SWAPped

  • NORMal: Expects/sends the least significant byte of each IEEE754 floating-point number first and the most significant byte last.

  • SWAPped: Expects/sends the most significant byte of each IEEE754 floating-point number first and the least significant byte last.


FormStatRegEnum Sregister#
// SCPI: FORMat:SREGister
FormStatRegEnum value = driver.Format.Sregister;
driver.Format.Sregister = FormStatRegEnum.ASCii;

Determines the numeric format for responses of the status register.

format: ASCii | BINary | HEXadecimal | OCTal

  • ASCii: Returns the register content as a decimal number.

  • BINary | HEXadecimal | OCTal: Returns the register content either as a binary, hexadecimal or octal number. According to the selected format, the number starts with #B (binary) , #H (hexadecimal) or #O (octal) .


FormDataEnum Data#
// SCPI: FORMat:[DATA]
FormDataEnum value = driver.Format.Data;
driver.Format.Data = FormDataEnum.ASCii;

Determines the data format the instrument uses to return data via the IEC/IEEE bus. The instrument automatically detects the data format used by the controller, and assigns it accordingly. Data format determined by this SCPI command is in this case irrelevant.

data: ASCii | PACKed

  • ASCii: Transfers numerical data as plain text separated by commas.

  • PACKed: Transfers numerical data as binary block data.The format within the binary data depends on the command. The various binary data formats are explained in the description of the parameter types.