from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from .......Internal import Conversions
from ....... import enums
from ....... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class ModeCls:
"""Mode commands group definition. 2 total commands, 1 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("mode", core, parent)
@property
def hcontinuous(self):
"""hcontinuous commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_hcontinuous'):
from .Hcontinuous import HcontinuousCls
self._hcontinuous = HcontinuousCls(self._core, self._cmd_group)
return self._hcontinuous
[docs] def set(self, trace_mode: enums.TraceModeF, window=repcap.Window.Default, subWindow=repcap.SubWindow.Default, trace=repcap.Trace.Default) -> None:
"""SCPI: DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:MODE \n
Snippet: driver.display.window.subwindow.trace.mode.set(trace_mode = enums.TraceModeF.AVERage, window = repcap.Window.Default, subWindow = repcap.SubWindow.Default, trace = repcap.Trace.Default) \n
Selects the trace mode. If necessary, the selected trace is also activated. For max hold, min hold or average trace mode,
you can set the number of single measurements with [SENSe:]SWEep:COUNt. Note that synchronization to the end of the
measurement is possible only in single sweep mode. In the R&S FSW AM/FM/PM Modulation Analysis application, when you
configure the traces for a window with a specific evaluation (e.g. AM time domain) , the traces in all windows with the
same evaluation are configured identically. For more information, see 'Analyzing Several Traces - Trace Mode'. \n
:param trace_mode: WRITe (default:) Overwrite mode: the trace is overwritten by each sweep. AVERage The average is formed over several sweeps. The 'Sweep/Average Count' determines the number of averaging procedures. MAXHold The maximum value is determined over several sweeps and displayed. The FSW saves the sweep result in the trace memory only if the new value is greater than the previous one. MINHold The minimum value is determined from several measurements and displayed. The FSW saves the sweep result in the trace memory only if the new value is lower than the previous one. VIEW The current contents of the trace memory are frozen and displayed. BLANk Hides the selected trace.
:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Window')
:param subWindow: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Subwindow')
:param trace: optional repeated capability selector. Default value: Tr1 (settable in the interface 'Trace')
"""
param = Conversions.enum_scalar_to_str(trace_mode, enums.TraceModeF)
window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
subWindow_cmd_val = self._cmd_group.get_repcap_cmd_value(subWindow, repcap.SubWindow)
trace_cmd_val = self._cmd_group.get_repcap_cmd_value(trace, repcap.Trace)
self._core.io.write(f'DISPlay:WINDow{window_cmd_val}:SUBWindow{subWindow_cmd_val}:TRACe{trace_cmd_val}:MODE {param}')
# noinspection PyTypeChecker
[docs] def get(self, window=repcap.Window.Default, subWindow=repcap.SubWindow.Default, trace=repcap.Trace.Default) -> enums.TraceModeF:
"""SCPI: DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:MODE \n
Snippet: value: enums.TraceModeF = driver.display.window.subwindow.trace.mode.get(window = repcap.Window.Default, subWindow = repcap.SubWindow.Default, trace = repcap.Trace.Default) \n
Selects the trace mode. If necessary, the selected trace is also activated. For max hold, min hold or average trace mode,
you can set the number of single measurements with [SENSe:]SWEep:COUNt. Note that synchronization to the end of the
measurement is possible only in single sweep mode. In the R&S FSW AM/FM/PM Modulation Analysis application, when you
configure the traces for a window with a specific evaluation (e.g. AM time domain) , the traces in all windows with the
same evaluation are configured identically. For more information, see 'Analyzing Several Traces - Trace Mode'. \n
:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Window')
:param subWindow: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Subwindow')
:param trace: optional repeated capability selector. Default value: Tr1 (settable in the interface 'Trace')
:return: trace_mode: WRITe (default:) Overwrite mode: the trace is overwritten by each sweep. AVERage The average is formed over several sweeps. The 'Sweep/Average Count' determines the number of averaging procedures. MAXHold The maximum value is determined over several sweeps and displayed. The FSW saves the sweep result in the trace memory only if the new value is greater than the previous one. MINHold The minimum value is determined from several measurements and displayed. The FSW saves the sweep result in the trace memory only if the new value is lower than the previous one. VIEW The current contents of the trace memory are frozen and displayed. BLANk Hides the selected trace."""
window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
subWindow_cmd_val = self._cmd_group.get_repcap_cmd_value(subWindow, repcap.SubWindow)
trace_cmd_val = self._cmd_group.get_repcap_cmd_value(trace, repcap.Trace)
response = self._core.io.query_str(f'DISPlay:WINDow{window_cmd_val}:SUBWindow{subWindow_cmd_val}:TRACe{trace_cmd_val}:MODE?')
return Conversions.str_to_scalar_enum(response, enums.TraceModeF)
def clone(self) -> 'ModeCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = ModeCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group