Source code for RsFsw.Implementations.Calculate.Limit.Clear.Immediate

from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from ..... import repcap


# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class ImmediateCls:
	"""
	| Commands in total: 1
	| Subgroups: 0
	| Direct child commands: 1
	"""

	def __init__(self, core: Core, parent):
		self._core = core
		self._cmd_group = CommandsGroup("immediate", core, parent)



	def perform(self, window=repcap.Window.Default, limitIx=repcap.LimitIx.Default) -> None:
		"""
		``CALCulate<n>:LIMit<li>:CLEar[:IMMediate]`` \n
		Snippet: ``driver.calculate.limit.clear.immediate.perform(window = repcap.Window.Default, limitIx = repcap.LimitIx.Default)`` \n
		Deletes the result of the current limit check. The command works on all limit lines in all measurement windows at the
		same time.

		:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Calculate')
		:param limitIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Limit')
		"""
		window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
		limitIx_cmd_val = self._cmd_group.get_repcap_cmd_value(limitIx, repcap.LimitIx)
		self._core.io.write(f'CALCulate{window_cmd_val}:LIMit{limitIx_cmd_val}:CLEar:IMMediate')




	def perform_with_opc(self, window=repcap.Window.Default, limitIx=repcap.LimitIx.Default, opc_timeout_ms: int = -1) -> None:
		window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
		limitIx_cmd_val = self._cmd_group.get_repcap_cmd_value(limitIx, repcap.LimitIx)
		"""
		``CALCulate<n>:LIMit<li>:CLEar[:IMMediate]`` \n
		Snippet: ``driver.calculate.limit.clear.immediate.perform_with_opc(window = repcap.Window.Default, limitIx = repcap.LimitIx.Default)`` \n
		Deletes the result of the current limit check. The command works on all limit lines in all measurement windows at the
		same time.

		Same as perform, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

		:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Calculate')
		:param limitIx: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Limit')
		:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
		"""
		self._core.io.write_with_opc(f'CALCulate{window_cmd_val}:LIMit{limitIx_cmd_val}:CLEar:IMMediate', opc_timeout_ms)