from ..........Internal.Core import Core
from ..........Internal.CommandsGroup import CommandsGroup
from ..........Internal import Conversions
from .......... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class StateCls:
"""State commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("state", core, parent)
[docs] def get(self, step=repcap.Step.Default) -> bool:
"""SCPI: SYSTem:COMMunicate:RDEVice:OSCilloscope:ALIGnment:STEP<1|2>[:STATe] \n
Snippet: value: bool = driver.applications.k9X11Ad.system.communicate.rdevice.oscilloscope.alignment.step.state.get(step = repcap.Step.Default) \n
Performs the alignment of the oscilloscope itself and the oscilloscope ADC for the optional 2 GHz / 5 GHz bandwidth
extension (FSW-B2000/B5000) . The correction data for the oscilloscope (including the connection cable between the FSW
and the oscilloscope) is recorded. As a result, the state of the alignment is returned. Alignment is required only once
after setup. If alignment was performed successfully, the alignment data is stored on the oscilloscope.
INTRO_CMD_HELP: Thus, alignment need only be repeated if one of the following applies: \n
- A new oscilloscope is connected to the 'IF OUT 2 GHz/ IF OUT 5 GHz' connector of the FSW
- A new cable is used between the 'IF OUT 2 GHz/ IF OUT 5 GHz' connector of the FSW and the oscilloscope
- A power splitter is inserted between the 'IF OUT 2 GHz/ IF OUT 5 GHz' connector of the FSW and the oscilloscope
- New firmware is installed on the oscilloscope or the FSW
For details see 'Alignment'. \n
:param step: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Step')
:return: alignment_step: No help available"""
step_cmd_val = self._cmd_group.get_repcap_cmd_value(step, repcap.Step)
response = self._core.io.query_str(f'SYSTem:COMMunicate:RDEVice:OSCilloscope:ALIGnment:STEP{step_cmd_val}:STATe?')
return Conversions.str_to_bool(response)