from .......Internal.Core import Core
from .......Internal.CommandsGroup import CommandsGroup
from ....... import repcap
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class SelectCls:
"""Select commands group definition. 1 total commands, 0 Subgroups, 1 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("select", core, parent)
[docs] def set(self, window=repcap.Window.Default, subWindow=repcap.SubWindow.Default) -> None:
"""SCPI: DISPlay[:WINDow<n>][:SUBWindow<w>]:SELect \n
Snippet: driver.applications.k91Wlan.display.window.subwindow.select.set(window = repcap.Window.Default, subWindow = repcap.SubWindow.Default) \n
Sets the focus on the selected result display window. This window is then the active window. For measurements with
multiple results in subwindows, the command also selects the subwindow. Use this command to select the (sub) window
before querying trace data. \n
:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Window')
:param subWindow: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Subwindow')
"""
window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
subWindow_cmd_val = self._cmd_group.get_repcap_cmd_value(subWindow, repcap.SubWindow)
self._core.io.write(f'DISPlay:WINDow{window_cmd_val}:SUBWindow{subWindow_cmd_val}:SELect')
[docs] def set_with_opc(self, window=repcap.Window.Default, subWindow=repcap.SubWindow.Default, opc_timeout_ms: int = -1) -> None:
window_cmd_val = self._cmd_group.get_repcap_cmd_value(window, repcap.Window)
subWindow_cmd_val = self._cmd_group.get_repcap_cmd_value(subWindow, repcap.SubWindow)
"""SCPI: DISPlay[:WINDow<n>][:SUBWindow<w>]:SELect \n
Snippet: driver.applications.k91Wlan.display.window.subwindow.select.set_with_opc(window = repcap.Window.Default, subWindow = repcap.SubWindow.Default) \n
Sets the focus on the selected result display window. This window is then the active window. For measurements with
multiple results in subwindows, the command also selects the subwindow. Use this command to select the (sub) window
before querying trace data. \n
Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value. \n
:param window: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Window')
:param subWindow: optional repeated capability selector. Default value: Nr1 (settable in the interface 'Subwindow')
:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call."""
self._core.io.write_with_opc(f'DISPlay:WINDow{window_cmd_val}:SUBWindow{subWindow_cmd_val}:SELect', opc_timeout_ms)