from ........Internal.Core import Core
from ........Internal.CommandsGroup import CommandsGroup
from ........Internal import Conversions
from ........ import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class SelectCls:
"""
| Commands in total: 1
| Subgroups: 0
| Direct child commands: 1
"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("select", core, parent)
[docs]
def set(self, meas_type: enums.MeasurementTypeK91) -> None:
"""
``CONFigure:BURSt:SPECtrum:FLATness:SELect`` \n
Snippet: ``driver.applications.k91Wlan.configure.burst.spectrum.flatness.select.set(meas_type = enums.MeasurementTypeK91.FLATness)`` \n
This remote control command configures result display type of window 2 to be either 'Spectrum Flatness' or 'Group Delay'.
Results are only displayed after a measurement is executed, e.g. using the method
``RsFsw.applications.k10Xlte.initiate.immediate.perform()`` command. Note that the CONF:BURS:<ResultType>:IMM commands
change the screen layout to display the 'Magnitude Capture' buffer in window 1 at the top of the screen and the selected
result type in window 2 below that. Any other active windows are closed. Use the LAYout commands to change the display
(see 'Working with windows in the display') .
:param meas_type: FLATness | GRDelay
"""
param = Conversions.enum_scalar_to_str(meas_type, enums.MeasurementTypeK91)
self._core.io.write(f'CONFigure:BURSt:SPECtrum:FLATness:SELect {param}')
# noinspection PyTypeChecker
[docs]
def get(self) -> enums.MeasurementTypeK91:
"""
``CONFigure:BURSt:SPECtrum:FLATness:SELect`` \n
Snippet: ``value: enums.MeasurementTypeK91 = driver.applications.k91Wlan.configure.burst.spectrum.flatness.select.get()`` \n
This remote control command configures result display type of window 2 to be either 'Spectrum Flatness' or 'Group Delay'.
Results are only displayed after a measurement is executed, e.g. using the method
``RsFsw.applications.k10Xlte.initiate.immediate.perform()`` command. Note that the CONF:BURS:<ResultType>:IMM commands
change the screen layout to display the 'Magnitude Capture' buffer in window 1 at the top of the screen and the selected
result type in window 2 below that. Any other active windows are closed. Use the LAYout commands to change the display
(see 'Working with windows in the display') .
:return: meas_type: FLATness | GRDelay
"""
response = self._core.io.query_str(f'CONFigure:BURSt:SPECtrum:FLATness:SELect?')
return Conversions.str_to_scalar_enum(response, enums.MeasurementTypeK91)