Source code for RsFsw.Implementations.Applications.K91_Wlan.Configure.Burst.Spectrum.Flatness.Immediate

from ........Internal.Core import Core
from ........Internal.CommandsGroup import CommandsGroup


# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
class ImmediateCls:
	"""
	| Commands in total: 1
	| Subgroups: 0
	| Direct child commands: 1
	"""

	def __init__(self, core: Core, parent):
		self._core = core
		self._cmd_group = CommandsGroup("immediate", core, parent)



	def perform(self, opc_timeout_ms: int = -1) -> None:
		"""
		``CONFigure:BURSt:SPECtrum:FLATness[:IMMediate]`` \n
		Snippet: ``driver.applications.k91Wlan.configure.burst.spectrum.flatness.immediate.perform()`` \n
		This remote control command configures the result display in window 2 to be 'Spectrum Flatness' or 'Group Delay',
		depending on which result display was selected last using method
		``RsFsw.applications.k91Wlan.configure.burst.spectrum.flatness.select.set()`` . Results are only displayed after a
		measurement is executed, e.g. using the method ``RsFsw.applications.k10Xlte.initiate.immediate.perform()`` command. Note
		that the CONF:BURS:<ResultType>:IMM commands change the screen layout to display the 'Magnitude Capture' buffer in window
		1 at the top of the screen and the selected result type in window 2 below that. Any other active windows are closed. Use
		the LAYout commands to change the display (see 'Working with windows in the display') .

		:param opc_timeout_ms: Maximum time to wait in milliseconds, valid only for this call.
		"""
		self._core.io.write_with_opc(f'CONFigure:BURSt:SPECtrum:FLATness:IMMediate', opc_timeout_ms)